음향공학 연구소
Research Activities
1. SCI 2014.01.31 곽문규
Effects of Composite Porous Gas-Diffusion Layers on Performance of Proton Exchange Membrane Fuel Cell
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
2. SCI 2014.08.31 곽문규
Two-dimensional numerical simulation of the red blood cell floating in a plasma-alcohol solution through stenosis in a microvessel, Korea-Australia Rheology Journal
3. SCI 2014.08.31 곽문규
Continuous fabrication process for double sided micro/nanopatterns
Materials Research Innovations
4. SCI 2014.11.26 곽문규
Continuous and Scalable Fabrication of Bioinspired Dry Adhesives via a Roll to Roll process with Modulated Ultraviolet-Curable Resin, ACS Applied Materials and Interfaces
5. SCI 2014.07.31 곽문규
Numerical investigation on composite porous layers in electroosmotic flow
IJPEM-GT
6. SCIE 2014.07.31 곽문규
Numerical investigartion on the effects of the positional variation of porosity in thin porous layers.pdf
IJPEM
7. SCI 2014.08.04 곽문규
Characteristics of Blood Vessel Wall Deformation with Porous Wall Conditions in an Aortic Arch
Applied Rheology
8. SCI 2014.04.30 곽문규
Continuous fabrication of bio-inspired water collecting surface via roll-type photolithography
International Journal of Precision Engineering and Manufacturing-Green Technology
9. SCI 2014.03.31 곽문규
Spatial control of adult stem cell fate using nanotopographic cues
BIOMATERIALS
10. SCI 2013.10.25 곽문규
Directional Oil Sliding Surfaces with Hierarchical Anisotropic Groove Microstructures
Advanced Materials
11. SCI 2013.10.04 곽문규
Template-free Vibrational Indentation Patterning (VIP) of micro/nano-scale grating structures with real-time pitch and angle tunability, Advanced Functional Materials
12. SCI 2013.07.18 곽문규
Continuous and high-throughput nanopatterning methodologies based on mechanical deformation
Journal of Materials Chemistry C
13. SCI 2013.12.03 곽문규
Photo–Roll Lithography (PRL) for Continuous and Scalable Patterning with Application in Flexible Electronics
Advanced Materials
14. SCI 2013.01.08 곽문규
Enhanced skin adhesive patch with modulus-tunable composite micropillars
Advanced Healthcare Materials
15. SCIE 2014.08.27 권순범
A Finite Element Procedure with Poisson Iteration Method Adopting Pattern Approach Technique for Near-Incompressible Rubber Problems, Advances in Mechanical Engineering
16. SCIE 2014.08 권순범
The empirical corner stiffeness for right-angle frames of rectangular and H-type cross-sections
Structural Engineering Mechanics
17. SCIE 2014.05 권순범
A Critical Heat Generation for Safe Nuclear Fuels after a LOCA
SCIENCE AND TECHNOLOGY OF NUCLEAR INSTALLATIONS
18. SCIE 2013.06 권순범
The effect of non-equilibrium condensation on the coefficients of force with the angle of attack in the transonic airfoil flow of NACA0012, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
19. SCIE 2013.11.01 권순범
Comprehensive Interpretation of a Three-Point Gauss Quadrature with Variable Sampling Points and Its Application to Integration for Discrete Data, JOURNAL OF APPLIED MATHEMATICS
20. SCIE 2013.01.10 권순범
A study on the flow characteristics in an annular type fuel pellet of PWR
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
21. SCI 2014.08.01 김만회
Numerical optimization of solar air heaters having different types of roughness shapes on the heated plate - Technical note, Energy
22. SCI 2014.06.01 김만회
Thermo-economic triple-objective optimization of a solar chimney power plant using genetic algorithms
Energy
23. SCIE 2014.03 김만회
Three-dimensional CFD analysis for simulating the greenhouse effect in solar chimney power plants using a two-band radiation model, Renewable Energy
24. SCI 2013.06.01 김석삼
Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface, Surface & Coatings Technology
25. SCI 2014.03 이호
Comparison of laser-assisted damage in soft tissue using bi-directional and forward-firing optical fiber
Optics & Laser Technology
26. SCI 2013.07.12 이호
Comparison of Laser-Induced Damage with Forward-Firing and Diffusing Optical Fiber During Laser-Assisted Lipoplasty, Laser in Surgery and Medicine
27. SCI 2013.09.26 이호
Development of a high speed laser scanning confocal microscope with an acquisition rate up to 200 frames per second
OPTICS EXPRESS
28. SCI 2013.07.11 이호
Comparison of Laser Ablation Using Multidirectional and Forward-Firing Fiber in Human Thyroid Gland: Experimental study Otolaryngology - Head and Neck Surgery
29. SCIE 2013.08.14 이호
Fabrication of a bi-directional firing multimode fiber using a high repetition rate femtosecond laser and a CO2 laser
LASER PHYSICS LETTERS
30. SCI 2013.01.31 이호
Diffusion Behaviors of Fluorescence Probe Molecules Through the Stratum Corneum Layer Under Physical Stress
The Journal of Membrane Biology
31. SCIE 2014.09 권영두
A Discrete Optimization Process for the Design of Horizontal Girders of Rising Sector Gate Using PIAnO
International Journal of Steel Structures
32. SCIE 2014.08 권영두
A Finite Element Procedure with Poisson Iteration Method Adopting Pattern Approach Technique for Near-Incompressible Rubber Problems, Advances in Mechanical Engineering
33. SCIE 2014.07 권영두
Shear Cutting Theory for the Peripheral Edges of Brush Blades, and Tests of Its Effectiveness
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
34. SCIE 2014.05.18 권영두
The empirical corner stiffness for right-angle frames of rectangular and H-type cross-sections
Structural Engineering Mechanics
35. SCI 2014.05.01 권영두
A Critical Heat Generation for Safe Nuclear Fuels after a LOCA
Science and Technology of Nuclear Installations
36. SCI 2014.05.01 권영두
Regression of the Recovery Rate of ACM Rubber Gasket for Long-Term Performances
Journal of Testing and Evaluation
37. SCIE 2014.01.31 권영두
IMPROVEMENT OF LONG-TERM LIVES OF RUBBER GASKETS OF POLYACRYLATE(ACM) BY EMPLOYING CARBOXYL CURE SITES, International Journal of Automotive Technology
38. SCIE 2013.12.31 권영두
Comprehensive Interpretation of a Three-Point Gauss Quadrature with Variable Sampling Points and Its Application to Integration for Discrete Data, Journal of Applied Mathematics
39. SCI 2013.11.29 권영두
Long-term life prediction of polyacrylate rubber(ACM) gasket with chlorine cure sites using the four-parameter recovery model, Journal of AUTOMOBILE ENGINEERING
40. SCIE 2013.06 권영두
The effect of non-equilibrium condensation on the coefficients of force with the angle of attack in the transonic airfoil flow of NACA0012, Journal of Mechanical Science and Technology
41. SCIE 2013.01.01 권영두
A study on the flow characteristics in an annular type fuel pellet of PWR
Journal of Mechanical Science and Technology
42. SCI 2014.06.11 이영중
Lithium Intercalation and Crystal Chemistry of Li3VO4 Synthesized by Ultrasonic Nebulization as a New Anode Material for Secondary Lithium Batteries, Journal of The Electrochemical Society
43. SCI 2014.03.01 이영중
Comparison of laser-assisted damage in soft tissue using bi-directional and forward-firing optical fiber
Optics & Laser Technology
44. SCI 2013.12 이영중
Synthesis and lithium intercalation properties of Li3VO4 as a new anode material for secondary lithium batteries
Journal of Power Sources
45. SCI 2013.10 이영중
Development of a high speed laser scanning confocal microscope with an acquisition rate up to 200 frames per second
OPTICS EXPRESS
46. SCI 2013.01.01 이영중
Structures and electrochemical properties of as new anode materials for secondary lithium batteries
Journal of Power Sources
47. SCIE 2013.07.20 이영중
Nano-mechanical Compliance of Muller Cells Investigated by Atomic Force Microscopy
International journal of Biological Sciences
48. SCI 2014.12.05 정영훈
Fabrication of a Nanofibrous Mat with a Human Skin Pattern
American Chemical Society
49. SCI 2014.03.25 정영훈
Fabrication of Nanofibrous Mats with Uniform Thickness and Fiber Density
MACROMOLECULAR MATERIALS AND ENGINEERING
50. SCI 2014.05.21 정영훈
Combined Effect of Three Types of Biophysical Stimuli for Bone Regeneration
TISSUE ENGINEERING PART A
51. SCIE 2013.10.10 정영훈
Microscale Diffusion Measurements and Simulation of a Scaffold with a Permeable Strut
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
52. SCI 2013.05.30 정영훈
A cell-laden nanofiber/hydrogel composite structure with tough-soft mechanical property
APPLIED PHYSICS LETTERS
53. SCI 2013.01.25 정영훈
Regulation of osteogenic differentiation of human adipose-derived stem cells by controlling electromagnetic field conditions, Experimental & Molecular Medicine
54. SCI 2013.02.15 정영훈
Fabrication of a three-dimensional nanofibrous scaffold with lattic pores using direct-write electrospinning
Materials Letters
55. SCI 2013.02 정영훈
Improving mechanical properties of alginate hydrogel by reinforcement with ethanol treated polycaprolactone nanofibers, Composites : Part B
56. SCI 2013.09.23 정영훈
Flexure-Based Device for Cyclic Strain-Mediated Osteogenic Differentiation
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
57. SCI 2014.02.03 김성열
Vapor-Phase Polymerization of Nanofibrillar Poly(3,4-Ethylenedioxythiophene) for Supercapacitors
ACS Nano
58. SCI 2014.01.29 김성열
Spray-Layer-by-Layer Carbon Nanotube/Electrospun Fiber Electrodes for Flexible Chemiresistive Sensor Applications
ADVANCED FUNCTIONAL MATERIALS
59. SCI 2014.03.21 김성열
An inter-tangled network of redox-active and conducting polymers as a cathode for ultrafast rechargeable batteries
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
60. SCI 2013.01.24 김성열
Rapid fabrication of thick spray-layer-by-layer carbon nanotube electrodes for high power and energy devices
ENERGY ENVIRONMENTAL SCIENCE
61. SCI 2014.06.24 노용래
Ultrasonic transducers for medical volumetric imaging
Japanese Journal of Applied Physics
62. SCI 2014.06.26 노용래
Design and fabrication of a multimode ring vector hydrophone
Japanese Journal of Applied Physics
63. SCI 2014.06.23 노용래
Ultrasonic two-dimensional array transducer of the single-unit type with a conductive backing of the 1-3 piezocomposite structure, Japanese Journal of Applied Physics
64. SCI 2014 노용래
Homogenization of PMN-PT/epoxy 1-3 piezocomposites by resonator measurements and finite element analysis
SENSORS AND ACTUATORS A-PHYSICAL
65. SCIE 2013.04.08 노용래
Evaluation of all the material constants of PMN-28%PT piezoelectric single crystals
Sensors and Materials
66. SCI 2013.11.14 노용래
Determination of the complex material constants of PMN-28%PT piezoelectric single crystals
Smart Materials and Structures
67. SCI 2014.03 변지수
Cance Cell Imaging by Stable Wet Near-field Scanning Optical Microscope with Resonance Tracking Method
Journal of the Korean Physical Society
68. SCI 2014.03.14 변지수
A resonance tracking method for stable operation of a near-field scanning optical microscope in liquid environment
CURRENT APPLIED PHYSICS
69. SCI 2014.01.21 변지수
Operation of a wet near-field scanning optical microscope in stable zones by minimizing the resonance change of tuning forks, NANOTECHNOLOGY
70. SCI 2014.02 채영훈
Effects of surface texturing on the frictional behavior of cast iron surfaces
Tribology International